Fusion Splicer ILSINTECH K7

Fusion Splicer ILSINTECH K7 SWIFT K7  Core to Core Alignment Swift K7 is the advanced typical core alignment type fusion splicer for the medium & long range optical circuit LAN, CATV, FTTx with world-fastest in splicing & sleeve heating time. It delivers high precision performance with low loss.

l BENEFITS AND FEATURES

Internet remote access maintenance     IPAAS Technology Basis Core Alignment      ▶ Swift K7 is the core alignment splicer based on the IPAAS (Image Pattern Analysis Alignment System)        Technology.    Automatic fiber recognition      ▶ SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655),        SM(ITU-T G.657 A2/B2), SM(ITU-T G.657 B3)   Fastest splice time in industry      ▶ Splicing Time : 6sec (Quick Mode)   Fastest heat time in industry      ▶ Tube heat : Typical 9sec (IS-45 Sleeve, IS-60 mode)  l  Typical 13초 (IS-60 Sleeve, IS-60 mode)   User friendly GUI    Resistance to Shock, Dust and Water      ▶ The splicer with high reliability has stable performance even in a harsh environment       l Shock-Free Fall : 76cm from 5 sides l Waterproof : IPx2 l Dustproof : IP5x

Powerful Lithium Polymer Battery with Large Capacity      ▶ Performs 300 cycles of fusion splicing and sleeve heating with the standard battery 4.3-inch Color LCD Monitor with Touch Screen      ▶ Magnification : 220X, MAX : 700X      ▶ For user’s convenience, LCD monitor has been designed with touch screen in addition to the        operation keys.  Bidirectional Operation System      ▶ For user’s ergonomic preference, the screen can be turned around for one’s chosen viewing direction.  Equipped with Sleeve Loader to Prevent Contamination and to Provide Convenience      ▶ While working in a manhole, the loader prevents the supplementary sleeve from falling and being        contaminated.      ▶ Working in aerial space such as telephone pole, the loader also prevents the supplementary sleeve from        falling down.  Built-in Dual Sleeve Heater      ▶ Productivity would be increased up to 30% due to a simple & user-friendly design.      ▶ The dual-heater can work for both Fiber to Fiber and Fiber to Swift Connector. Auto-Calibration      ▶ Detects the surrounding environment of temperature, humidity, air pressure and measures        discharge calibration rate automatically.  Compatible with Fusion Splice-On Connector(SOC) in accordance with the Industrial Standard     l SPECIFICATIONS Category Description Fiber alignment IPAAS core to core alignment(Image pattern analysis alignment system) Applicable type of fibers SM(ITU-T G.652), MM(ITU-T G.651),DS(ITU-T G.653), NZDS(ITU-T G.655), ITU-T G.657 Automatic fiber recognition SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655),SM(ITU-T G.657 A2/B2),SM(ITU-T G.657 B3) Fiber count Single fiber Applicable fiber dimensions Cladding diameter: 80 ~ 150㎛, Coating diameter: 100 ~ 1000㎛ Fiber setting and cleaved length 250㎛: 8~16mm Splicing modes Splice mode: 300, Heat mode: 100 Typical Splice Loss SMF: 0.02dB, MMF: 0.01dB, DSF: 0.04dB, NZDSF: 0.04dB Return Loss > 60dB Splicing Time Splice: Typical 6sec(Quick mode) Splice loss estimate Available Sleeve heating time Typical 9sec (IS-45 Sleeve, IS-60 mode) Typical 13sec (IS-60 Sleeve, IS-60 mode) Applicable protection sleeve 40mm, 45mm, 60mm (fiber), 32mm or 28mm (Connector) Storage of splice result The last 10,000 results to be stored in the internal memory. (Image 10,000 results) Tension test 2N / 4.4N(Option) Operating condition Altitude: 0~5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof Storage condition Temperature: -40℃~80℃, Humidity: 0~95% Dimension 142(W) ｘ163(L) ｘ146(H)mm(Including rubber) Weight 2.0kg(Including battery 2.5kg) Viewing method and display Two CMOS cameras and 4.3-inch color LCD monitor with touch screen Fiber view and magnification X or Y view : 220X, MAX : 700X Power supply DC Lithium polymer battery(DC 14.8V, 6000mAh), 100~240V AC Adapter No. of splice cycles with battery 300cycle Electrode life More than 3,500 times Terminals USB, RCA, External Power(DC 12V Available for car cigar jack) l STANDARD PACKAGE Category Model Q’ty Arc Fusion Splicer K7 1 AC Adapter F1-1 1 USB Cable - 1 Upgrade Cable - 1 Sleeve Loader S312 2 Spare Electrode EI-21 1 pair Battery Pack K713 1 Colling Tray CT-03(60mm) 1 Manual Stripper CF-02 1 Hex Wrench - 1 Fiber Cleaver CI-03A 1 Moving Strap - 1 Tool Box - 1 Brush - 1 Alcohol Dispenser - 1 User Guide CD - 1 Data Sync CD - 1 User Manual - 1 Silica Gel 20g - 1 Calibration Guide Manual - 1 HC-Key - 1 Shoulder Belt - 1 Carrying Case Hard Case 1 l OPTION PACKAGE     Category Model Battery Pack K713 Fiber Cleaver CS-03A (Connector) Cleaver Blade BI-05 Electrode EI-21 Fiber Holder HS-250, HS-900, HS-2.5, HS-IN, HS-SC, HS-LC, HS-ST, LS-900 Sleeve S-160(60mm), S-140(40mm),IS-60(60mm), IS-45(45mm) Sleeving Clamp  SC-01 SOC Connector SC, LC, FC, ST (Refer to FTTx Solution catalogue) RCA Cable 2.5m Black External Power DC 12V Available for car cigar jack